安裝探測器是有竅門的，今天我們就來簡單的學習一下探測器的安裝位置及安裝注意事項：

安裝位置：

A、探測器安裝在被檢測氣體易漏場所，安裝位置根據被檢測氣體相對于空氣比重大小決定。

B、當被檢測氣體比重大于空氣比重時，探測器應安裝在距離地面(30～60)cm處，且傳感器部位向下。

C、當被檢測氣體比重小于空氣比重時，探測器應安裝在距離頂棚(30～60)cm處，且傳感器部位向下。

安裝注意事項：

為了正確使用探測器及防止探測器故障的發生，請不要安裝在以下位置：

A、直接受蒸汽、油煙影響的地方；

B、 給氣口、換氣扇、房門等風量流動大的地方；

C、水氣、水滴多的地方（相對濕度：≥90%RH）；

D、溫度在-40℃以下或50℃以上的地方；

E、 有強電磁場的地方。

The installation of the detector is the trick, today we will come to simply learn the installation and installation of the detector.

Installation position:

A, the detectors installed in the detected gas leakage place, according to the installation position relative to the air proportion determines the size of gas is detected.

When the specific gravity of the detected gas is greater than the specific gravity of the air, the detector should be installed at the distance from the ground (30~60) cm and the sensor position is down.

C, when the specific gravity of the detected gas is less than the specific gravity of the air, the detector should be installed at the distance from the ceiling (30~60) cm, and the position of the sensor is down.

Installation note:

In order to use the detector correctly and prevent the failure of the detector, please do not install it in the following position:

A, the place directly affected by steam and oil smoke;

B, air outlet, fan, doors and other large local flow;

C, moisture, water in many places (relative humidity: = 90%RH);

D, the temperature is below -40 C or more than 50 C.

E, where there is a strong magnetic field.