固定式氣體探測器就是檢測氣體泄露的報警儀器.當工業環境中可燃或有毒氣體泄露,氣體探測器檢測到氣體濃度達到爆炸或中毒報警器設置的臨界點時,報警器就會發出報警信號,以提醒工作采取安全措施,并驅動排風、切斷、噴淋系統,防止發生爆炸、火災、中毒事故,從而保障安全生產.
Alarm instrument fixed gas detector is to detect the leakage of the gas in the industrial environment. When combustible or toxic gas leak, gas detector to detect gas concentration reaches the critical point of explosion or poisoning alarm settings, alarm will be issued a warning signal to remind the work safety measures, and drive exhaust, cutting, spraying system, prevent the occurrence of the explosion, fire and poisoning accidents, to ensure safety in production.
工業用固定式氣體檢測儀由氣體報警控制器和探測器組成,控制器可放置于值班室內,主要對各監測點進行控制,探測器安裝于氣體易泄露的地點,其核心部件為內置的氣體傳感器,傳感器檢測空氣中氣體的濃度.
With a fixed gas detector by industrial gas alarm controller and detector, the controller can be placed in the duty room, the main control of each monitoring point, the gas leakage detector is arranged in place, the core components of gas sensor built-in, concentration sensor detecting gases in the air.
濟南瑞安電子有限公司對于固定式氣體探測器安裝位置做出了如下要求:
Ji'nan Ruian Electronics Co., Ltd. has made the following requirements for the installation position of the fixed gas detector:
1、氣體探測器應安裝在氣體易泄漏場所,具體位置應根據被檢測氣體相對于空氣的比重決定.
1, the gas detector should be installed in the gas leakage place, the specific position should be determined according to the proportion of the detected gas to the air.
2、當被檢測氣體比重大于空氣比重時,探測器應安裝在距離地面(30——60)cm處,且傳感器部位向下.
2. When the specific gravity of the detected gas is greater than the specific gravity of the air, the detector should be installed at the distance from the ground (30 to 60) cm, and the sensor position is down.
3、為了正確使用探測器及防止探測器故障的發生,請不要安裝在以下位置:
3. In order to use the detector correctly and prevent the fault of the detector, please do not install it in the following position:
4、直接受蒸汽、油煙影響的地方.
4. The place directly affected by steam and oil smoke.